Products

THERMISTOR KIT 24Kohm @ 77˚ F Includes thermistor, and compression fitting Mounts in chamber

THERMISTOR PROBE Material: 316 stainless steel housing Rated: 5000Ω at 25˚C Fits: Thermistor Arm Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATT662

THERMOSTAT CHATTANOOGA Off at 140˚ F - 170˚ F 20A @ 120/240VAC Includes thermostat, Sealing Washer (RPI Part #CHW006), bulkhead fitting with jam nut and flat washer, (2) mounting screws, and bulb mounting bracket Also available: Bracket (Bulb Support) (RPI...

THERMOSTAT CONTROL Range: 220˚ F - 350˚ F Fits: Control Housing Assembly

THERMOSTAT KNOB Material: Black plastic Size: Fits .250" dia. 'D' Shaft; 1.61" OD x .85" tall Also available: Timer (30 Minute) (RPI Part #RPT766) and Timer (60 Minute) (RPI Part #RPT767) Fits: Timer and Thermostat (1/4" dia. 'D' Flat Shaft)...

THERMOSTAT PLUG GASKET ~2.60" OD Material: Sponge Rubber Fits: Thermostat Plug Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIG017

THERMOSTAT SWITCH Operates 220˚ F-350˚ F Includes controller, bulb, capillary tubes, and mounting hardware Controller mounts to control panel

THERMOSTAT/BRACKET ASSEMBLY 115 VAC Opens at 165°F; max temperature 550°F Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATT635

THREADLOCKER 242 5 per package .02 fl. oz. (.5ml) per tube Prevents rust and corrosion Removable adhesive by Loctite® Fits: Cap Nut and T-bolt on the Door Assembly & Belt Block, 1/4" screw size or smaller Model(s) This Part Fits:...

THREADLOCKER 545 5 per package .02 fl. oz. per unit Temperature range of -65°F to 300°F (-54˚ to 149˚C) Seals operating pressures up to 10,000 PSI For use on all pneumatic and hydraulic fittings Material: Loctite® 545; Color: Purple Model(s)...

THUMB SCREW 8 per package 6-32 x 3/8 Material: Nylon® 66 Fits: Molded Base / Fixer & Developer Circulator Cover Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATS642

TIE BAR PIVOT PIN 2 per package Material: Stainless steel RPI's Tie Bar Pivot Pin has a screwdriver slot at the end for easy alignment when installing both the mechanical and gas spring assemblies. It's the RPI Advantage! Fits: Front...

TIE BARS 2 per package Not to be used with Gas Spring with Anchor (Ceiling or Track Mount) (RPI Part #PCS601) or Gas Spring with Anchor (Unit Mount) (RPI Part #PCS602) Fits: Front Arm Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCB667

TILT CYLINDER KIT A-DEC 1.88" OD x 12.18" O/A Lg (retracted) Includes cylinder, (2) 1/4-20 x 1/2” LG Stainless steel socket head cap screw and Thread-locker 242 (RPI Part #RPA032) Uses Hydraulic fluid (RPI Part #RPF449) Fits: Link Assembly Model(s)...

TILT CYLINDER KIT 2.12" OD ~14.75" lg. - Center hole to center hole (retracted) Includes: Cylinder, (4) Cable Ties (RPI Part #RPT279) and (8) Cable Ties (RPI Part #RPT085) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table base Model(s)...

TILT CYLINDER 2.13" OD x 14.75" center hole to center hole (retracted) Fits: Table Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC112

TILT CYLINDER 2.13" OD x 14.75" center hole to center hole (retracted) Includes:Cylinder, (8) Cable Tie (8" Black) (RPI Part #RPT085) (4) Cable Tie (8" Black) (RPI Part #RPT279) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table Base Model(s)...

TILT SWITCH PELTON & CRANE Momentary contact (On/Off/On) 6A @ 125VAC; 3A @ 250VAC Snap in mounting White Paddle Fits: Back assembly (Chairman) and Foot Switch Assembly (Chairman 5090) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCS717