Products

Set of 2 The two drum cartridge filters can entrap material as small as .5 microns, helping to keep your air clean and remove dusts from the environment. The filters can be easily removed for cleaning and re-installed. 103FC Filter...

Set of 2 The two drum cartridge filters can entrap material as small as .5 microns, helping to keep your air clean and remove dusts from the environment. The filters can be easily removed for cleaning and re-installed. 105FC Filter...

A rubber tipped air blowgun for tabletop and bench use. Connects to a standard 1/4” [0.6cm] NPT air and activates with the bending movement of the rubber nozzle. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 3 1/16” L x 5/8”...

Metal, nickel plated blow gun activated by depressing push button on top of gun. Connects to standard 1/4” [0.6cm] NPT air line. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 3 1/2” L x 1 5/8” H x 13/16” W [9cm...

Metal, nickel plated blow gun activated by depressing lever located on top of gun. Connects to standard 1/4” [0.6cm] NPT air line. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 4 3/16” L x 2” H x 1 1/8” W [11cm...

Rubber covered braided air hose. Five feet in length with 1/4” [0.6cm] NPT fittings both sides. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 1/2” Diameter x 60” Long [1.3cm x 152.5cm]

Coiled nylon air hose with 1/4” [0.6cm] NPT swivel fittings both ends. 10 feet (3 meters) in length with coil extended fully. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 6” Diameter x 9” Wide (compressed) [15.2cm x 22.9cm]

Air coupler designed for rapid connection or disconnection of 1/4” [0.6cm] NPT air line. Zinc plated for extended service. Shipping Wgt.: 1 lb [0.5 Kg] Dimensions: 2 7/8” L x 3/4” W [7cm x 2cm]

31 Model Trimmer with Diamond Wheel “The Professional” A 10” [25cm] diameter model trimmer powered by a full 1/3 HP ball bearing, capacitor start motor. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter...

31 Model Trimmer with Solenoid Valve “The Professional” A 10” [25cm] diameter model trimmer powered by a full 1/3 HP ball bearing, capacitor start motor. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter...

31X Model Trimmer A “Professional” 10” [25cm] diameter model trimmer powered by a 1/4 HP ball bearing, capacitor start motor for those desiring lower pricing. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter...

31X Model Trimmer with Diamond Wheel A “Professional” 10” [25cm] diameter model trimmer powered by a 1/4 HP ball bearing, capacitor start motor for those desiring lower pricing. Features include a swing-open front housing for ease of cleaning and wheel...

31X Model Trimmer with with Solenoid Valve A “Professional” 10” [25cm] diameter model trimmer powered by a 1/4 HP ball bearing, capacitor start motor for those desiring lower pricing. Features include a swing-open front housing for ease of cleaning and...

32 Model Trimmer A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features a larger frontal...

32 Model Trimmer with Diamond Wheel A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features...

32 Model Trimmer with Solenoid Valve A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features...

32-3/4 Model Trimmer A Hi-Torque 12” diameter Model Trimmer powered by a 3/4 HP, capacitor start, 1725 rpm, ball bearing motor. Designed for and built for the very busy laboratory that trims a large quantity of models each day or...

32-3/4 12" Wheel, 3/4 HP High Torque Model Trimmer with Diamond Wheel A Hi-Torque 12” diameter Model Trimmer powered by a 3/4 HP, capacitor start, 1725 rpm, ball bearing motor. Designed for and built for the very busy laboratory that...