RPI

TRANSPORT REPAIR KIT Completely rebuilds Transport Assembly If needed, secure the Rubber Bumper (RPI Part #ATB609) in place with Silicone Gasket Maker 598 (RPI Part #RPS639) Fits: Transport Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATK663

HEATER ELEMENT ASSEMBLY 1136W, 118VAC, ~12Ω Size: 3.56" W x 8.09" lg.; 7/16-20 Bushings Heater Mounting Hardware (RPI Part #RCH119) also sold seperately Includes: Heater Element, Heater Mounting Hardware (RPI Part #RCH119), and (4 pieces) Quick Disconnect Terminal (High Temperature)...

PATIENT CABLE - 3 LEAD DIN PHYSIO CONTROL/MEDTRONIC Number of Leads: 3 Length: 10 ft. Equipment End: 12-Pin Right Angle; 10K Ω Resistors Patient End: Din/Unshielded .060" Pin (Safety) Colors: White, Red and Black Also available: Patient Cable - 3...

PATIENT CABLE-3 LEAD FIXED SNAP PHYSIO CONTROL/MEDTRONIC Number of Leads: 3 Length: 10 ft. Equipment End: 12-PIN Right Angle; 10K Ω Resistors Patient End: Fixed Snap Colors: White, Red & Black Also available: Patient Cable - 3 Lead DN (RPI...

AIR VENT BELLOWS ASSEMBLY 1/4" compression fittings- both ends Material: Bronze diaphragm style; Stainless steel housing Mounts to tubing between temperature gauge and reservoir Actuates within 12°F of saturated steam temperature Fits: Chamber to Condesning Tank (older style units) Model(s)...

HEATING ELEMENT CHATTANOOGA 1500W, 120VAC, ~10Ω Size: 10.12" x 14.00", 1/2-20 Bushing Includes: Stainless steel attaching hardware, (2 pieces) Sealing Washer (RPI Part #CHW006), and (2 pieces) Fully Insulated Q.C. Terminal (1/4" Female) (RPI Part #RPT472) Also available: Bracket (Element...

PM PACK (DOOR, 16") See Notes below for parts included in this kit Fits: 16" x 16" Door Assembly

ARM KNUCKLE Redesigned to eliminate drift when used with the RPI Drift Kit (RPI Part #PCK651) (Two Drift Kits required for each Arm Knuckle) For Your Safety use a Main Arm Spring Safety Pin (RPI Part #PCP691) to lock the...

DROP KNUCKLE Material: Aluminum Not Painted Part is primed and ready to paint Includes: Installed bushings Fits: Drop Arm to Front Arm Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCK668

CONTROL PANEL RELAY 8A@120V Fits: Control Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIR024

STEPDOWN TRANSFORMER CLAY ADAMS® (BECTON DICKINSON) 120V step down to 24V Mounts to underside of control panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAT093

6 LEADWIRE SET - 30" MULTI-LINK/PINCH MARQUETTE/GE MEDICAL Number of Leads: 6 Individual Leadwires with Combiner Length: 30" Equipment End: Dual/Shielded; Compatible to GE Multi-link® Patient End: Pinch Colors: Green, White, Black, Red, Brown and Yellow Includes: (2) 3 Lead...

MANIFOLD BLOCK ASSEMBLY Material: Brass Body and Fittings See Serial # breakdown below. Also included in: Fill/Vent Valve Assembly (RPI Part #MIA137) Also available: Solenoid Valve (Fill) (RPI Part #MIV138), Solenoid Valve Repair Kit (RPI Part #RCK113), Solenoid Valve (Vent)...

TIMER (30 MIN) Includes mounting screws Timer Knob sold separately - see RPI Part #RCK092 or RPI Part #RCK111 The Wire Harness (RPI Part #RCH117) may be needed to extend the length of the original Wire Harness when upgrading to...

CHECK VALVE (1/2") CK1, CK2 & CK3 1/2" FPT inlet and outlet Included in: PM pack (Misc) (RPI Part #AMP214) Also Available: Check Valve Rebuild Kit (RPI Part #AMK231)

3/4" ROTOR SLIDES Set of 3BrassModel(s) This Part Fits:www.rpiparts.com/SearchModelList.aspx?rpinum=GOS029

SOLENOID VALVE (FILL), , MIDMARK-RITTER 1/4" ports; 2-Way: N.C. 120VAC, 60Hz., 10W; 1/4" Tabs Material: Brass body; Viton seals Included in: Fill/Vent Manifold Kit (RPI Part #MIK202) and Fill/Vent Valve Upgrade Assembly (RPI Part #AMA274) Also available: Spanner Nut (RPI...

DIFFERENTIAL PRESSURE INDICATOR Norgren brand Replacement to fit Particle Filter Assembly (RPI Part #CMA082) Includes: Mounting Screws Fits: Norgren brand F73 Particle Filter Assembly (RPI Part #CMA082) Model(s) This Part Fits: