RPI

RETURN HOSE KIT Material: Neoprene Length: ~15 in. Fitting: 7/16-20 female x 1/2-20 Inverted Flare 90º Elbow Fits: Base Cylinder Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH004

TROLLEY BRACKET ASSEMBLY Fits: Trolley to Track Power Cord Connection and Wire Harness (RPI Part #PCW620) See SERVICE TIP below. Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCA657

SOLENOID COIL RITTER 49.78 ohm min; 55.02 ohm max; Coil Rating: 120VAC Coil: 1.265" OD x 1.335" long with .500" dia. through hole Wire: 11" lg. Fits: Solenoid Valve Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCC601

POWER HOSE Length: ~13.75" Fittings: 7/16-20 Female x 1/2-20 Inverted Flare 90˚ Elbow Also available: Cable Tie (12" Black) (RPI Part #RPT375) Fits: Pump to Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH100

DOOR GASKET 8.625" OD Pancake style, hole in center Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCG071

HOSE ASSY (TILT CYLINDER) A-DEC Length: ~44.00" Fittings: 7/16-20 Flare Female x 7/16-20 Flare 90° Elbow See Notes below for Serial #'s this part fits Also Available, Cable Tie (4" White) (RPI Part #RPT083) and Hydraulic Fluid (RPI Part #RPF449)...

FLUORESCENT LAMP (BLUE) 20W; 120V Size: 1-1/2" OD x 24" lg. Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LMP019

COIL (VENT VALVE) Non-manifold mount; 120VAC 50/60 Hz, FWR, 10W 150˚C, 3.24-3.96 MEG Ω; 1/4" Tabs Fits: Vent Solenoid Valve assembly (non-manifold mount) older style units Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC083

VACUUM GAUGE (LIQUID FILLED) Size: 2.0" dia. Dual Scale: 0 to 30 In. Hg (0 to 1 Bar) Material: Stainless steel case and bezel Port: 1/4" MPT center back mount Includes: Gauge, Female Connector (1/4" poly x 1/4" FPT) (RPI...

SOLENOID IDEXX VT (V901-22) Pull style 6 VDC Includes: Solenoid assembly and mounting hardware Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BKS027

DOOR GASKET (16" x 16") Material: Blue silicone New material with greater lubricity! .43" OD cross section See Notes below Warning: This gasket is not for use on Ethylene Oxide (E.O. Gas) sterilizers Fits: 16" x 16" Door

VACUUM GAUGE 1.500" Diameter Dial 0 to 30 In.Hg. (0 to 760 mmHg.) Clockwise scale Black bezel and body 1/8 MPT port Fits: Muffler Bar

DOOR GASKET Size OD: 17.89" x C/S: .375" Sq. Fits: 12" x 16" Rectangular Door

DOOR GASKET Size ~20.246" OD x C/S 375" Sq. Fits: 20" Round Door

PRESSURE GAUGE 0-60 PSIG/0-410 KPa 1.500" dia. dial Center back mount - 1/8 MPT Fits: Door assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMG163

DIFFERENTIAL PRESSURE INDICATOR Wilkerson brand Replacement to fit Particle Filter Assembly (RPI Part #CMA084) Includes: Mounting screws and O-rings Fits: Wilkerson brand B18, F18 & M18 Particle Filter Assembly (RPI Part #CMA084) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMI095

DOOR GASKET 9.000" x 9.000" x .500 sq C/S Fits: 9" Square Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMG005

STRAINER (3/4") Includes: Strainer Element (3/4") ( RPI Part #AME233) Also Available: Strainer Element (3/4") ( RPI Part #AME233) 3/4" FPT Inlet and Outlet Fits: Plumbed in line between Water Manifold and M1 Ball Valve