RPI

HEATING ELEMENT ASSEMBLY 800 W, 120VAC, ~18 ohms Includes heating element, Mounting and Connecting Hardware (RPI Part #AMH019) Mounts inside chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMH018

PATIENT CABLE-5 LEAD DUAL MARQUETTE/GE MEDICAL Number of Leads: 5 Length: 10 ft. Equipment End: 11-Pin Patient End: Dual/Shielded; .060" Pin (Safety) Color: Brown, White, Red, Black, Green. See NOTES for Suggested Leadwire Sets Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KEC003

DUAL OFFSET SHAFT Material: Stainless Stell Fits: Multiport Valve

RETURN HOSE Length: ~50.00" Fittings: 1/2-20 Inverted Flare Also available, Hydraulic Fluid ( RPI Part #RPF384 ) Fits: Pump to Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH102

PATIENT CABLE - 5 LEAD FIXED PIN Number of Leads: 5 Length: 8 ft. Equipment End: 5-Pin Patient End: Fixed .125" Pin Color: White, Green, Brown, Red, and Black Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KEB014

HEATING ELEMENT 1400W, 120VAC (~10 Ω) Includes: See Notes Below Mounts in water pan Also available: Heater Mounting and Connecting Hardware (RPI Part #NAH009) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=NAH004

COIL (VENT VALVE) Manifold mount; AC Valve 180˚ C 271 - 318Ω 120VAC/ 60Hz. Need Valve? RPI Part #MIS045 Need Repair Kit? RPI Part #MIK055 Fits: Vent solenoid valve assembly (manifold mount) older style units Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC059

30" capillary tube with a 3/16" dia. x 5-1/2" lg. bulb Operates from 0 to 32 PSIG This Thermostat Control is actually a "Pressure Stat" type device. The bulb is open ended Includes Control Thermostat and Knob ( RPI Part...

SUPPORT BAR Use to support the weight of the table top when replacing the base actuator and the gas cylinder. Fits: Left and Right Side panels Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIT177

LOCKING GAS CYLINDER Extension Force = 400 N (90 LBF) Also available: Actuator Cap Kit (RPI Part #MIK189) & Plunger (RPI Part #MIP188) Fits: Back Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC088

PATIENT CABLE-3 LEAD DUAL ABBOTT Number of Leads: 3 Length: 10 ft. Equipment End: 6-Pin; Jumper E to B Patient End: Dual/Shielded; .060" Pin (Safety) Color: White, Red, and Black See NOTES for Suggested Leadwire Sets Model(s) This Part Fits:...

SOLENOID VALVE REPAIR KIT Viton® seal For Black Coil Valves Includes all parts as shown Also available: O-ring (RPI Part #RPO865) Fits: Sol-3 Air-In (Black Coil) Valve Assembly Model(s) This Part Fits: 400 - 500 Series

CHECK VALVE (1/4") CK14 1/4" FPT inlet and outlet Also Available: Check Valve Rebuild Kit (RPI Part #AMK230) Also included in PM Pack (Misc) (RPI Part #AMP214)

GULLWING ASSEMBLY Includes gullwing, nylon washer, spring washer, knob and top section of locking cam Repair Tips When changing the Gullwing Assembly or Head Assembly, install new Tube Cushions at the same time. ( RPI Part #CAC028 - RUBBER CUSHION...

PATIENT CABLE-5 LEAD FIXED BANANA HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Number of Leads: 5 Length: 13 ft. Equipment End: 6-PIN Patient End: Fixed Banana Plug Color: White, Green, Brown, Red, and Black See NOTES below Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KEB030

PATIENT CABLE-5 LEAD DUAL HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Number of Leads: 5 Length: 10 ft. Equipment End: 12-Pin; 1K Ω Resistors Patient End: Dual/Shielded; .060" Pin (Safety) Color: Brown, White, Red, Black, and Green See NOTES for Suggested Leadwire Sets Model(s)...

BRUSH 2 per package Size: .315" x .787" x .860" lg. No spring 3.88" copper shunt wire with red top pad and sensor wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BAB008

POWER SWITCH/CIRCUIT BREAKER Toggle Switch (On-Off); 12.5A circuit breaker 12.5A @ 125/250VAC, 50/60 Hz 1/4" Tabs Mounting hole size: .500" dia. Includes: Mounting hardware Included in: Power Harness Assembly (RPI Part #CVA005) Fits: Rear Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CVS006