RPI

PATIENT CABLE-3 LEAD DIN HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Number of Leads: 3 Length: 10 ft. Equipment End: 8-Pin; 1K Ω Resistors Patient End: Din/Unshielded; .060" Pin (Safety) Color: White, Red, and Black For available Leadwire Sets, see Notes below Model(s) This...

TIME DELAY RELAY KIT 1A @120 VAC/DC Preset: .20 sec. delay .25" Tabs Includes wire assemblies Fits: Cylinder Solenoids Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIR017

TEMPERATURE SENSOR Range: 1.07KΩ to 1.1KΩ @ 25˚C (Positive Temperature Coefficient) Material: Stainless steel housing; 1/4" MPT Wires: 18-1/2" lg. Also available: Temperature Probe Assembly (RPI Part #MIP050) Fits: Rear Chamber Port (newer style units) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIS121

DIMMER SWITCH ASSEMBLY Includes: Knob (RPI Part #BUK042) Fits: Post Knuckle Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCA680

RIGHT ANGLE THERMOMETER Graduated in Celsius 18˚ to 40˚ Graduated in Farhenheit 60˚ to 105˚ Includes (2) Nylon Mounting Ring Fits: Isolette Hood Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIT086

PRESSURE GAUGE (JACKET) 2.5" Dial Scale: 30 in. Hg Vac to 0 PSI (unmarked) and 0-100 PSI (marked) Dial face: White with black characters 1/8" MPT bottom mount Zero adjustment Fits: Jacket

PRESSURE GAUGE (CHAMBER) 2.5" Dial Scale: 30 in. Hg Vac to 0 PSI (marked) and 0-100 PSI (unmarked) Dial face: White with black characters 1/8" MPT bottom mount Zero adjustment Fits: Chamber

5 LEADWIRE SET - 30" DUAL/ALLIGATOR Number of Leads: 5Length: 30"Equipment End: Dual/ShieldedPatient End: Alligator - ClipColor: Red, White, Green, Black, and BrownRecommended For Veterinary Use OnlyModel(s) This Part Fits:www.rpiparts.com/SearchModelList.aspx?rpinum=LVM707

K-2 RELAY CLAY ADAMS® (BECTON DICKINSON) 120V Fits: Mounts to underside of control panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAR095

MICRO FILTER (DEW-ETTE) 4 per package ~6 x 24" Synthetic media - contains no glass fibers Latex free Includes: Gaskets Fits: Shell and Deck Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIF082

POWER HOSE KIT Material: Neoprene Length: ~39.25 in. Fitting: 7/16-20 female x1/2-20 Inverted Flare 90º Elbow Fits: Tilt to Back Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH007

PATIENT CABLE-3 LEAD FIXED SNAP ABBOTT Number of Leads: 3 Length: 11 ft. Equipment End: 6-PIN; Jumper E to B Patient End: Fixed Snap Color: White, Red, and Black Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KCB008

6 LEADWIRE SET - 30" MULTI-LINK/SNAP MARQUETTE/GE MEDICAL Number of Leads: 6 Individual Leadwires with Combiner Length: 30" Equipment End: Dual/Shielded; Compatible with GE Multi-link® Patient End: Snap Colors: Green, White, Black, Red and Brown (2) Includes: (2) 3 Lead...

CABLE ASSY (LIFT LIMIT) A-DEC Overall length: ~18.25" See Notes below for Serial #'s this part fits Fits: Base Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC206

HEAD ADAPTOR ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) Includes: Head Adaptor Nut (RPI Part #IEN004) Fits: Pressed on Shaft of Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAA053

LINE FILTER ASSEMBLY 5mm dia. x 20mm lg. fuses not included 10A @ 125/250VAC, 50-60 Hz Also available: Fuse (8A, 250V) (RPI Part #RPF535) to fit 120VAC Force FX and Force FX-C, and Fuse (4A, 250V) (RPI Part #RPF533) to...

POWER HOSE KIT Material: Neoprene Length: ~14 in. Fitting: 7/16-20 female both ends Fits: Pump to Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH003

RETURN HOSE KIT Material: Neoprene Length: ~23.75 in. Fitting: 7/16 female both ends Fits: Tilt to Back Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH008