RPI

BALL VALVE (1/4") Red "Emergency Exhaust" handle 1/4" FPT Inlet and Outlet Fits: Mounted above Chamber Door

SUCTION CUP FOOT CLAY ADAMS® (BECTON DICKINSON) 4 per package 3/4 high shoulder 8-32 x 3/8 stud Mounts to base plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAF014

FOOT SWITCH ASSEMBLY (PCB) PELTON & CRANE Includes Actuator Spacer (RPI Part #PCA726) Fits: Foot Switch Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCB730

VACUUM GAUGE Size: 2.0" dia. Dual Scale: 0 to 30 In. Hg (0 to 1 Bar) Material: Stainless steel case and bezel Port: 1/4" MPT center back mount Includes: Gauge, Female Connector (1/4" Poly x 1/4" FPT) (RPI Part #RPF936),...

BRUSH IEC B20-A (Late Model) 2 per package Size: 1/4 x 1-1/4 x 1-1/4" Radius: 1-1/8" Bevel: 5 deg. Spring length: 1-5/8" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB012

GUIDE PLATE ASSEMBLY Material: Zinc plated steel Each Trolley Assembly requires (2) Guide Plate Assemblies Includes: (2 pcs) Dowel Pin (RPI Part #RPP750) & Roller (RPI Part #PCR796) Fits: Standard Trolley Assembly (OEM Part #001032) & Standard Dual Trolley Assembly...

AUTO RETURN & INTERLOCK RELAY 10A@28VDC Coil: 120VAC 3 PDT 1/3 HP, 13A, 120VAC; 1/2HP, 13A, 277VAC; 3/4 HP, 3A, 600VAC Fits: Control Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIR018

Mechanical Timer with Bell - No Switch (30 Minute)

BALL CATCH ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) Mounts to exterior of body on units using old style latch assembly (OEM Part #0591-604-001) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAC006

BACTERIA FILTER 3 per package .3 micron 1/4" Barb x 1/8" MPT Disk Size: 2.100"

FRONT SHIELD Material: Clear plastic Size: 8.50" Dia. Fits: Light Head Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BES044

DOOR GASKET Size: ~12.750" OD Material: Silicone rubber Included in: Sterilizer PM Kit (RPI Part #MIK080) Also available: Dam Gasket (RPI Part #MIG036) and Door Insulator Pad (RPI Part #MIP041) Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIG028

SAFETY SWITCH ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) SPDT 3A, 125VAC; 1A, 250VAC Mounts opposite ball catch assembly Includes switch, and insulator Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS040

POWER SWITCH CLAY ADAMS® (BECTON DICKINSON) Rotary style: On-Off-On-Off 3A @ 125VAC; SPST Includes: Mounting hardware Wire length: ~6" lg. Fits: Chassis Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS119

REPAIR KIT (VENT VALVE) Non-manifold mount; Ac valve Includes all parts as shown This Kit does not include the Coil Need Coil? RPI Part #MIC058 Need Valve? RPI Part #MIS043 Fits: Vent solenoid older style units Model(s) This Part Fits:...

WIRE HARNESS Plugs into Trolley Bracket Assembly Fits: Track Trolley Power Cord Connection - See SERVICE TIP below Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCW620

DOOR GASKET OD: ~19.80" x C/S: .375" Sq. Also included in: PM Pack (Door, 16") (RPI Part #AMP246) Fits: 16" x 16" Square Door

RELAY (UNIVERSAL) Size: ~2.00" L x 1.84" W x 1.30" H Universal mounting configuration Includes: .25" quick connect tabs and (x6) tab to screw adaptors 110-270VAC single phase Max voltage contact rating: 502VAC Motor power rating: up to 10HP Fits:...