RPI

7 LEADWIRE SET - 24" DIN/ALLIGATOR A.I.R. Number of Leads: 7 Length: 24" Equipment End: Din/Unshielded; .060" Safety Socket Patient End: Alligator Clip Colors: White, Red, Green, Brown, Black, Blue, Orange Recommended For Veterinary Use Only Model(s) This Part Fits:...

INTENSITY SWITCH 6A @ 125VAC, 3A @ 250VAC 3 position (low, medium, high) Includes: Intensity Switch, Mounting Hardware, 1P-Connector (Female, Male & Harnesses C & D Sets), 2P-Connector (Female & Harness B Set), Harness with Connector Pin, and Harnesses C...

SHOCK MOUNT ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) 4 assemblies per package Includes (4) 8-32 x 2" Phillips head screw, (4) No. 8 flat washer, (4) .265" ID x .500" OD x .062" Thk flat washer, (4) 8-32 hex nut, (4)...

SOCKET HEAD CAP SCREW KIT Hardware Material: Stainless Steel All parts also sold separately! Kit includes 12-Compartment Storage Case (RPI Part #RPB416) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADK110

BRUSH EPPENDORF 5415, 5415C & 5402 2 per package Size: .250 x .312 x .860 Radius: 1/2" Spring length: 1.430" Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=EPB002

INLET TUBING KIT (RED) Also included in Master Tubing Kit (RPI Part #GXK041) Fits: Fluid interface assembly to solution container Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=GXK026

INLET TUBING KIT (BLUE ) Also included in Master Tubing Kit (RPI Part #GXK041) Fits: Fluid interface assembly to solution container Model(s) This Part Fits:

INLET TUBING KIT (CLEAR) Included in: Master Tubing Kit (RPI Part #GXK041) Fits: Fluid interface assembly to solution container Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=GXK028

BRAKE SWITCH CLAY ADAMS® (BECTON DICKINSON) DPDT Momentary 15A, 125VAC; 10A, 250VAC; 1/2HP, 250VAC Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS043

HEATER SWITCH (RED) Momentary push button switch; N.O. 10A@125/250VAC; DPST Illuminated red lens 1/4" tabs Panel cut-out: .880" x 1.100" Fits: Control Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIS014

GASKET (HEATER FLANGE) 3 per package Size: 2-1/2” x 2-1/2” x 1/8” thk. Center hole: 1-5/8” Bolt holes: 7/16" dia. Material: Klinger-SIL C-4500 Fits: Heating Element Flanges: 2-1/2” x 2-1/2” secured by 7/16” bolt

FOOT SWITCH & CABLE ASSEMBLY PELTON & CRANE Momentary contact (On/Off/On) 6A @ 125 V; 3A @ 250 V Snap in mounting White Paddle Fits: Inner base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCA737

SNAP ACTION DIAPHRAGM Includes: Diaphragm, and Diaphragm Gasket (RPI Part #AMG101)

DOOR GASKET 10.500" OD Pancake style, hole in center Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCG073

SOLIDS COLLECTOR (3/4") Ports: 3/4" FPT Material: Black plastic body with clear plastic bowl Includes: Bowl, Bowl Gasket (RPI Part #VPG080) and Screen (50 Mesh) (RPI Part #VPS076) Also available: Screen (20 Mesh) (RPI Part #VPS077), Solids Collector Replacement Kit...

BRAKE CABLE A-DEC ~25.31" Long; Clear Nylon® Jacket Stainless steel cable and fittings Includes: Brake Cable and Hex Nut (RPI Part #RPH727) Also available: Mount (Brake Cable) (RPI Part #ADM225) See Notes below for Serial #'s this part fits Fits:...

DOOR SWITCH ASSEMBLY 0.1A@125/250 VAC; SPDT; N.O. Includes all parts as shown Fits: Switch weldment (older style units) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIS039

VOLUME CONTROL ASSEMBLY 100 Ώ Potentiometer 19" lg. wires with connector Includes: Mounting hardware and cable clamp Fits: Rear Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CVA007