RPI

DOOR GASKET Size: 11.31" OD Material: Red Silicone When replacing this gasket, it is also a good time to replace the Door Spacer (RPI Part #PCS067) Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCG066

BRAKING RESISTOR CLAY ADAMS® (BECTON DICKINSON) Wirewound fixed power 150 OHM, 50W Fits: Braking resistor assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAR097

LAMP (24V, 200W) Base: GX5.3 2-Pin Bulb Shape: MR16 Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LMP603

TIME DELAY RELAY 15A @ 120VAC Heat Time: 20-70 seconds; Cool Time: 50-80 seconds Mounts to bottom plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCR078

PROTECTIVE RUBBER SHEET Material: Black rubber Fits: Bracket T Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BES050

HEATER SWITCH (RED) Rocker switch (On-Off), SPST Illuminated red light panel 6A@250VAC; 12A@125VAC 1/4" tabs Fits: Control Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIS013

CAPACITOR Size: ~1.75" dia x 3.00/3.75" tall 20µf, 440VAC, 50/60Hz.; Electrolytic Run Capacitor .25" tabs Includes: Mounting P-clip, Speednut (RPI Part #PCN136) and mounting screw (RPI Part #PCS133) Fits: Start Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMC031

LIFT GEAR PELTON & CRANE 1.28" O.D. x .63" Thk, .500" I.D. Thru Phenolic Material 39 Teeth, Helical Includes Grease (RPI Part # RPL717) Fits: Lift Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCG762

CLEAR SIGHT GLASS Size: 5/8" OD x 8" lg. Includes: Clear sight glass, (2) rubber seal, and (2) fiber washer Also available: Sight Glass Collar (RPI Part #AMC153) Fits: Electro Steam Generator

DOOR GASKET 10.375" OD Fits: Door

HEAD COVER KNOB ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) Includes retaining ring Fits: Shaft Adaptor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAK002

HEAD COVER KNOB CLAY ADAMS® (BECTON DICKINSON) Fits: Shaft Adaptor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAK003

LAMP (12V, 50W) Base: 2 Pin Type: Halogen; EXZ/CC Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LMP018

FLOAT SWITCH Includes (2) Fully Insulated Male 1/4" Tabs & (2) Insulated Female Tabs (RPI Part #RPT015) 24" lg. leads For System 1 (International Customers only), see Model Notes below. Fits: Reservoir Assembly/ Float Block Assembly Model(s) This Part Fits:...

BRAKE SWITCH CLAY ADAMS® (BECTON DICKINSON) DPDT Momentary 15A, 125VAC; 10A, 250VAC Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS064

FILTER ELEMENT AND SCREEN Size: .88" OD x .25" lg. PM Sticker is included for recording the date that the filter was replaced It's the RPI Advantage! Also available: Vacuum Relief Valve (RPI Part #VPV063) Fits: Vacuum Relief Valve Assembly...

TIMER KNOB CLAY ADAMS® (BECTON DICKINSON) Size: 1-1/4" dia. x 5/8" tall Black plastic body with white top and pointer Fits 3/16" Shaft Includes set screw Fits Sero-Fuge II timer with 3/16 round shaft Fits: Timer shaft Model(s) This Part...

KNUCKLE & ROD CONNECTOR For Your Safety use a Main Arm Spring Safety Pin (RPI Part #PCP691) to lock the Main Arm Spring Assembly in place before you service or replace. Material: Aluminum, Not Painted Fits: Arm Knuckle to Leveling...