RPI

BRUSH 2 per package Size: .252" x .392" x .875" lg. Radius: .94" No spring 1.69" copper shunt wire with 1/4" female push-on connector and sensor wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BAB006

ACTUATOR CAP KIT

SIGHT GLASS KIT Steel retainer body with built in sight glass 1-1/8 - 12 thread; Includes: O-Ring Seal Also available, Sight Glass Tool (RPI Part #RPT705) Fits: Copeland Head Lubricated Compressors Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMK098

SOLID STATE RELAY 1.70" L x 0.58" W x 1.25" H 3.8 - 8VDC input; 3A 120VAC output Solder or PCB terminals OAC5 Model this part fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CSR029

MANUAL THERMOSTAT Opens @ 335˚ F; Closes @ 290˚ F Push to reset Fits: Bracket that mounts to under side of chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCT050

WATER LEVEL SENSOR Material: Pins 303 SS Fits: Base Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATS641

RESET SWITCH ASSEMBLY SPST Normally Open 0.5A, 125VAC ~6" LG. Wires Red Button Fits: Controller Front Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIS067

YOKE DRIFT KIT 2 sets per package Material: Zinc plated steel Includes: (4) Set Screw (M3 x 10), (2) Shaft (Bushing), (2) Washer (Zinc Steel) (M14), (4) Wave Washer (M14), (2) Washer (Brass) (M14), (2) Washer (Plastic) (M14), & (2)...

RUBBER CUSHION CLAY ADAMS® (BECTON DICKINSON) 12 per package Color: Black Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAC038

LAMP (28V, 75W) Base: BA15D double contact bayonet Halogen Bulb Shape: T-4 Fits: Dental Light Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LMP608

MOUNTING BRACKET Wilkerson brand "L" type mounting bracket Black powder coated steel Includes (2) Plastic Retainer Clips (wall mounting hardware not included) Use with Coalescing Filter Assembly Also available, Coalescing Filter Assembly (RPI Part #CMA022) Fits: Wilkerson brand F26 &...

MOTOR SHOCK MOUNT ASSEMBLY IEC MB Micro-Hematocrit 3 per package Includes: Rubber isolators, sleeves, and washers Fits: Motor Mounts of Drive Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IES020

LIFT CAPACITOR PELTON & CRANE Electrolytic medium 53-64 µf; 220/250VAC Fits: Base motor/lift motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCC728

OPERATE SWITCH ASSEMBLY PELTON & CRANE Normally Open 3/4A @ 125VAC Red button Fits: Chair back assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCS719

EXIT SWITCH ASSEMBLY PELTON & CRANE Normally Open 3/4A @ 125VAC Black button Fits: Chair back assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCS720

REPLACEMENT BRUSH CLAY ADAMS® (BECTON DICKINSON) 2 per package For a handy guide regarding Centrifuge Motors, Click here Fits: Governor brush carrier Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAB083

ACCESS PANEL GASKET ~10.25" x 27" Material: PVC Color: Grey Fits: Access Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIG019

PRESSURE/VACUUM GAUGE (CHAMBER), WATER PRESSURE GAUGE Center back mount, 1/8 MPT; 2.5" dial Gauge has zero adjust pointer Reads Chamber Pressure/Vacuum Dual scale: 0-60 PSIG/10-30 PSIG & 0-4.2 kgs. sq. cm/254-760mm Hg. Includes: Gauge, mounting bracket, and hardware Fits: Front...