RPI

LAMP (25V, 150W) Base: Double ended R7S Halogen Bulb Shape: T-5 Requires Socket Retractor Tool (RPI Part #PCT685) for installation All Models: LFI & LF+ Also available: Light Socket (RPI Part #PCS605 and PCS607) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCL606

THERMOSTAT PLUG GASKET ~2.60" OD Material: Sponge Rubber Fits: Thermostat Plug Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AIG017

3/8" VALVE SEAT Material: Stainless steelIncluded in: 3/8" PRV KIT (RPI Part #AMK111)Fits: Union Angle ValveModel(s) This Part Fits:www.rpiparts.com/SearchModelList.aspx?rpinum=AMS052

3 LEADWIRE SET - 24" DIN/ALLIGATOR ABBOTT Number of Leads: 3 Length: 24" Equipment End: Din/Unshielded; .060" Safety" Socket Patient End: Alligator Clip Color: White, Red, and Black Recommended For Veterniary Use Only Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LVM701

DOOR GASKET 11.000" OD x .375" x .250" C/S Fits: 8" Square Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMG006

THERMOSTAT CONTROL Range: 220˚ F - 350˚ F Fits: Control Housing Assembly

Capacitor Size: ~1.81" dia x 3.38" tall 145-174µf, 250VAC, 50/60Hz.; Electrolytic Motor starting Dual .25" tabs 18K bleed resistor installed Includes: Mounting P-clip, Speednut (RPI Part #PCN136) and mounting screw (RPI Part #PCS133) Fits: Start Box Model(s) This Part Fits:...

CAPACITOR Size: ~1.81" dia x 3.38/4.38" tall 540-648µf, 115VAC, 50/60Hz.; Electrolytic Motor starting Dual .25" tabs 18K bleed resistor installed Fits: Start Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMC042

SOLENOID VALVE REPAIR KIT Piston style repair kit Includes all parts as shown Buna N Seals Fits: Solenoid Valve (Purge) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMK133

SWITCH (INTENSITY) 6A @ 125VAC; SPDT; On/Off/On Includes: (3 pcs) 4 1/2" lg wire & (3 pcs) Wire Nut (RPI Part #RPT017) Fits: Yoke Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCS804

THERMAL PROTECTOR ASSEMBLY For use with 3/4HP, 208-230VAC or 3/4HP, 230VAC Compressor Heads Automatic reset Nominal opens at 105˚C ± 5˚C and closes at 61˚C ± 9˚C Includes: Protector clamp Fits: Compressor Head Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMP063

THERMAL PROTECTOR ASSEMBLY For use with 3/4HP, 115VAC Compressor Heads Automatic reset Nominal opens at 120˚C ± 5˚C and closes at 69˚C ± 9˚C Includes: Protector clamp Fits: Compressor Head Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMP064

MONOPOLAR RECEPTACLE 4-Socket receptacle Material: Aluminum body: clear finish Termination style: Solder Included in: Footswitch Receptacle Assembly (RPI Part #CVA002) Fits: Rear Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CVR004

DOOR GASKET 11.500" OD Ring style Fits: Door Ring Style Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCG023

RUBBER FOOT CLAY ADAMS® (BECTON DICKINSON) 3 per package Steel washer molded in Mounts to base plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAF013

PILOT LIGHT CLAY ADAMS® (BECTON DICKINSON) Red 125VAC, 1/3W Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAL082

5 LEADWIRE SET - 24" DIN/ALLIGATOR   Number of Leads: 5Length: 24"Equipment End: Din/Unshielded; .060" Safety SocketPatient End: Alligator ClipColor: Red, White, Green, Black, and BrownRecommended For Veterinary Use OnlyModel(s) This Part Fits:www.rpiparts.com/SearchModelList.aspx?rpinum=LVM703

VACUUM GAUGE (LIQUID FILLED) Size: 2.0" dia. Dual Scale: 0 to 30 In. Hg (0 to 1 Bar) Material: Stainless steel case and bezel Port: 1/4" MPT bottom mount Also available: Vacuum Gauge (RPI Part #VPG047) Fits: Manifold Assembly Model(s)...