RPI

LIMIT SWITCH (PCB) PELTON & CRANE Fits: Incline/recline and upper traverse Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCB733

SOLENOID VALVE REPAIR KIT FOR 1-1/4” PORT VALVES For 1-1/4" port valves Includes all parts as shown plus a Bonnet Wrench Piston/Diaphragm style repair kit Fits: V-23 Chamber Drain, S-10 Valves

TOP COVER KIT Also available: Adhesive (RTV108) (RPI Part #RPA874), Display PC Board (RPI Part# MIB115) and Speednut (RPI Part #PCN136) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIK196

HEATER PLATE Size: 4.37" wide x 9.00" lg. Material: Silicone rubber heater on stainless steel backing plate 40W, 24VDC (~14.4 ohm) 25" leads with 2 pin Amp connector Thermal cutout opens at 112˚F Fits: Base Plate Model(s) This Part Fits:...

COMPRESSOR PM KIT For oil-less six headed compressors All parts also sold separately Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMK144

PROGRAM PANEL Size: ~5.25" x 12.60" Includes: Metal mounting plate and mounting hardware Also available: Interface PC board (RPI Part #MIB192) Fits: Side Console Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIP191

SAFETY VALVE (40 PSI) 1" MPT x 1-1/4" FPT Material: Bronze Body EP Seat Cracking pressure: 40 PSI Fits: Chamber Jacket Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CSV086

3/8” PRV KIT See NOTES BelowFits: 3/8" Steam Control Valve, PM for PR1Model(s) This Part Fits:www.rpiparts.com/SearchModelList.aspx?rpinum=AMK111

PRESSURE SWITCH ASSEMBLY (1 INLET) Includes: Switch (RPI Part #AMS275), Mounting Bracket, and Bellows Assembly (RPI Part #AMB107) Mounts to Chamber Pressure Gauge

PRESSURE SWITCH ASSEMBLY (2 INLETS) Includes: Switch (RPI Part #AMS275), Mounting Bracket, and Bellows Assembly (RPI Part #AMB108) Mounts to Chamber Pressure Gauge

FAN 120VAC, 50/60 Hz. 2.77" W x 3.11" D x 10.43" Lg 1/4" tabs Also included in Heater and Fan Assembly (RPI Part #ATA670) Fits: Heater and Fan Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATF667

SOLENOID VALVE REPAIR KIT For Piston style valve EPDM seals Includes all parts as shown

HEAD ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) Precision Balanced When replacing this part, it is also a good time to replace the Rubber Cushion (RPI Part #CAC028) Fits: Pressed on Shaft of Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAA073

SWITCH ASSY (PADDLES LT) A-DEC Left side only, pre-position 3 black paddle switches For right side use Switch Assy (Paddles RT) (RPI Part #ADA214) See Notes below for serial numbers this part fits Fits: Backrest Assembly (left side only) Model(s)...

SWITCH ASSY (PADDLES RT) A-DEC Right side only, auto return 3 black paddle switches For left side use Switch Assy (Paddles LT) (RPI Part #ADA213) See Notes below for serial numbers this part fits Fits: Backrest Assy (right side only)...

WATER CONTROL ASSEMBLY (1 HP) Fully assembled for easy installation 0.5 GPM flow 24VAC solenoid valve Includes: Anti-Syphon Valve (RPI Part #VPV007), Flow Regulator (0.5 GPM) (RPI Part #VPR009), Solenoid Valve Assembly (RPI Part #VPV005) and Strainer (Water-1/8") (RPI Part...

WATER CONTROL ASSEMBLY (2 HP) Fully assembled for easy installation 1.0 GPM flow 24VAC solenoid valve Includes: Anti-Syphon Valve (RPI Part #VPV007), Flow Regulator (1.0 GPM) (RPI Part #VPR010), Solenoid Valve Assembly (RPI Part #VPV005) and Strainer (Water-1/8") (RPI Part...

TILT CYLINDER KIT A-DEC 1.88" OD x 12.18" O/A Lg (retracted) Includes cylinder, (2) 1/4-20 x 1/2” LG Stainless steel socket head cap screw and Thread-locker 242 (RPI Part #RPA032) Uses Hydraulic fluid (RPI Part #RPF449) Fits: Link Assembly Model(s)...